+0086-791-88383677
blesia@cnecan.com
Type:AL Series Lubricator,pressure regulator, Source Treatment Unit
Fluid:AIR
Ambient and fluid temperature:--5~60°C (Non-freezing)
Thread:BSPP
Packing:One piece lubricator
Material:Aluminum,plastic
Max. operating pressure:10bar
Proof pressure:15bar
Single package size: 10X10X10 cm
Single gross weight:0.5 KG
SMC type Series AL Modular style lubricator
Improved visibility for lubricant drip. with graduation for lubricant control.
Air lubricator: AL1000~AL5000 Series
*AL1000~5000 series air lubricator, equivalent to SMC
* Rc(PT), G(PF) or NPT thread option.
*Port size: M5, 1/8″, 1/4″, 3/8″, 1/2″, 3/4″, 1
*Easy to maintain and operate, long service life.
1) Please clear up metal granules, dust and oil inside the pipeline prior to product installation.
2) Please confirm if the gas flow direction is correct prior to installation, and it must be vertically installed .
3) It shall be checked if the fed gas pressure meets usage requirement prior to pressure setting.
4) The adjusting button is normally in lock . Pull up the hand wheel and turn clockwise, the pressure is increased, turn anticlockwise, the pressure in decreased. Pull into lock-up position after adjustment to prevent the set pressure from changing.
5) Oil mist unit shall be equipped with a quantitative regulator to keep enough lubrication upon gas feeding.
6) It shall be checked if the unit with a protective cover is fixed prior to use to avoid danger.
7) If the filter is differential pressure type water draining system, the water is automatically drained when the working pressure is lower than 0.05Mpa .
